FM-305MH, FM-305ATC

 

分享到:

MODEL

FM-305MH

FM-305ATC

TABLE

Working surface

610x1854mm(24"x73")

T-slots (size x number x pitch)

18mmx5x70mm (0.709"x5x2.756")

Max. table load

1500kgs (3300 lbs)

TRAVEL

Longitudinal travel (X axis)

1500mm (59")

Cross travel (Y axis)

850mm (33-7/16")

Vertical travel (Z axis)

710mm (28")

Distance from spindle end to table

105~815mm (4-1/8"~32")

Distance from spindle center to column

869mm (34-3/16")

Distance from floor to table surface

895mm (35-1/4")

SPINDLE

Spindle nose taper

BT40 (or BT50, opt.)

Spindle speeds

vari 6000 r.p.m. (BT40)
 (or 8000/10000 r.p.m., opt.)(BT40)

FEED

Cutting feed rate (X, Y, Z axes)

1~3000mm/min. (max.)
【or 1~5000mm/min. (max.) (F-F), opt.】

Rapid traverse (X, Y axes)

5.0m/min. (max.)【or 10m/min. (max.) (F-F), opt.】

Rapid traverse (Z axis)

5.0m/min. (max.)【or 10m/min. (max.) (F-F), opt.】

ATC

Tool storage capacity

16pcs (or 20pcs, opt.)
(BT40) (carrousel)

Max. tool weight

7kgs (15.4 lbs)/ 15kgs
(33.1 lbs)(BT50)

Max. tool size (dia. x length)

89x250mm (3-1/2"x9-7/8")/ 125x300mm (4-7/8"x11-3/4")(BT50)

Tool selection

Random

Tool shank

BT40 (or BT50, opt.)

Pull stud bolt

MAS-P40T-1/ MAS-P50T-1 (BT50)

Distance from gauge line of tool holder to table

645mm (25-3/8")

MOTOR

Spindle motor

AC 15HP (or 20HP, opt.)

X, Y, Z axes motor (900M)

AC servo, 1KW,2000 r.p.m.
【or 2KW, 2000 r.p.m. (F-F), opt.】

Coolant pump motor

AC1/6HP/1/4HP(F.E.G.)

GENERAL

Gross weight (Approx.)

6000kgs (13200 lbs)

6200kgs (13640 lbs)

Packing size (L x W x H)

3200x2260x2550mm (126"*89"*100-3/8")

  • The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice.  All the specifications shown above are just for reference.