FM-340MH, FM-340ATC, FM-395MH, FM-395ATC

 

分享到:

MODEL

FM-340MH

FM-340ATC

FM-395MH

FM-395ATC

TABLE

Working surface

762x1830mm(30"x72")

813x2185mm (32"x86")

T-slots (size x number x pitch)

18mmx5x100mm (0.709"x5x3.9")

Max. table load

1800kgs (3960 lbs)

TRAVEL

Longitudinal travel (X axis)

1700mm (66-7/8")

2000mm (78-3/4")

Cross travel (Y axis)

850mm (33-7/16")

Vertical travel (Z axis)

710mm (28")

Distance from spindle end to table

105~815mm (4-1/8"~32")

Distance from spindle center to column

870mm (34"-1/4")

Distance from floor to table surface

885mm (34-13/16")

SPINDLE

Spindle nose taper

BT40 (or BT50, opt.)

Spindle speeds

 vari 6000 r.p.m. (BT40) (or 8000/10000 r.p.m., opt.) (BT40)

FEED

Cutting feed rate (X, Y, Z axes)

1~5000mm/min. (max.)

Rapid traverse (X, Y axes)

10.0m/min. (max.)

Rapid traverse (Z axis)

10.0m/min. (max.)

ATC

Tool storage capacity

16 pcs
(or 20pcs,opt.)(BT40) (carrousel)

16pcs
(or 20pcs,opt.)(BT40) (carousel)

Max. tool weight

7kgs (15.4 lbs)/ 15kgs(33.1 lbs)(BT50)

7kgs (15.4 lbs)/ 15kgs(33.1 lbs)(BT50)

Max. tool size (dia. x length)

89x250mm
(3-1/2"x9-7/8")/ 125x300mm
(4-7/8"x11-3/4")(BT50)

89x250mm
(3-1/2"x9-7/8")/ 125x300mm
(4-7/8"x11-3/4")(BT50)

Tool selection

Random

Random

Tool shank

BT40
(or BT50, opt.)

BT40
(or BT50, opt.)

Pull stud bolt

MAS-P40T-1/ MAS-P50T-1 (BT50)

MAS-P40T-1/ MAS-P50T-1 (BT50)

Distance from gauge line of tool holder to table

645mm (25-3/8")

645mm (25-3/8")

MOTOR

Spindle motor

AC 15HP (or 20HP, opt.)

X, Y, Z axes motor (900M)

AC servo, 3.5KW, 2000 r.p.m.

Coolant pump motor

AC1/4HP

GENERAL

Gross weight (Approx.)

6700kgs
(14740 lbs)

6900kgs
(15180 lbs)

7000kgs
(15470 lbs)

7200kgs
(15912 lbs)

Packing size (L x W x H)

3000x2300x2545mm (118-1/8"x90-9/16"x100-3/16") +3030x2300x1060mm (119-5/16"x90-9/16"x41-3/4")

  • The manufacturer reserves the right to modify the design, specifications, mechanisms… etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.