FM-495MH/FM-495ATC

 

分享到:

MODEL

  FM-495MH

FM-495ATC

TABLE

Working surface

813x2750mm (32"x108-1/4")

T-slots (size x number x pitch)

18mmx5x125mm (0.709"x5x4.921")

Max. table load

2000kgs (4400 lbs)

TRAVEL

Longitudinal travel (X axis)

2500mm (98-1/2")

Cross travel (Y axis)

850mm (33-1/2")

Vertical travel (Z axis)

710mm (28")

Distance from spindle end to table

100~810mm (3-7/8"~31-7/8")

Distance from spindle center to column

870mm (34-1/4")

Distance from floor to table surface

880mm (34-5/8")

SPINDLE

Spindle nose taper

BT40 (or BT50, opt.)

Spindle speeds

vari 6000 r.p.m. (BT40)
(or 8000/10000 r.p.m., opt.) (BT40)

FEED

Cutting feed rate (X, Y, Z axes)

1~5000mm/min. (max.)

Rapid traverse (X, Y axes)

10.0m/min. (max.)

Rapid traverse (Z axis)

10.0m/min. (max.)

ATC

Tool storage capacity

-

20pcs(BT40) (carrousel)             (or 24pcs, arm type, opt.)

Max. tool weight

-

7kgs (15.4 lbs)/                   15kgs(33.1 lbs)(BT50)

Max. tool size (dia. x length)

-

89x250mm (3-1/2"x9-7/8")/ 125x300mm (4-7/8"x11-3/4")(BT50)

Tool selection

-

Random

Tool shank

-

BT40 (or BT50, opt.)

Pull stud bolt

-

MAS-P40T-1/                         MAS-P50T-1 (BT50)

Distance from gauge line of tool holder to table

-

645mm (25-3/8")

MOTOR

Spindle motor (AC servo)

11/15KW (or 15/18.5KW, opt.)

X, Y, Z axes motor (900M)

5KW,MHMA,2000 r.p.m.

Coolant pump motor

AC 1/4HP

GENERAL

Gross weight (Approx.)

10200kgs (22542 lbs)

10400kgs (22984 lbs)

Packing size (L x W x H)

  3230x2300x2545mm (127-3/16"x90-9/16"x100-3/16") +3030x2300x1060mm (119-5/16"x90-9/16"x41-11/16")

  • The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.